A new concrete driveway in Creve Coeur starts with ripping out any cracked old slabs so the ground can settle properly. We clear the area, dig down to firm soil, and lay a compacted stone base that stops future settling. The surface is then sloped about 1/4 inch per foot to send water away from your house. Rebar or mesh is added in the form to keep the slab from cracking under weight and temperature shifts. After pouring, the concrete is kept moist for at least a week, letting it cure strong before you drive on it. Call (888) 405-6638 for a free estimate and get the job done right.
We start by excavating to the right depth and removing soft soil. A compacted stone base gives the slab strength. Forms are set square and level for proper width. We lay rebar or wire mesh to hold the concrete together. Then we pour a 4-inch thick slab and finish it smooth. The surface is troweled to a slight slope for drainage. Proper curing keeps cracks out.
Call us and we’ll pick a date that fits your schedule. We show up on time, ready with all tools. The crew works efficiently to finish the job in a day. We protect the wet concrete from rain or wind. After the pour we walk you through the care steps. No surprises, just a solid driveway when you need it. Our crew cleans up the site before they leave.
We give a clear, written quote before any work starts. The price covers site prep, forms, reinforcement, concrete, and finishing. No hidden fees for drainage or extra labor. If you need extra depth or decorative stamping, we’ll add it to the estimate. You only pay for what you approved. Our rates match local market rates for quality work. We stand by the price and the result.
Our team knows the soil conditions around Creve Coeur, so we prep the base right. We use local suppliers for fresh concrete mix. The crew is trained in proper finishing and curing. We keep the slab level and slope it to move water away from your house. Everyone wears safety gear and follows local building codes. We respect neighbors and keep noise low. The job is done right the first time.
First we clear vegetation and any old pavement. Then we compact the ground and lay a 4-inch gravel base. Forms are nailed tight to hold the shape. We place rebar grid to prevent cracking. A vapor barrier is added under the slab for moisture control. The concrete is poured and screeded smooth. Finally we cure it with a mist or covering for at least 48 hours.
We monitor the cure and spray water if it dries too fast. After cure we remove forms and backfill the edges. We inspect for any surface defects and fix them. A final walk-through ensures you’re happy with the slope and finish. We give you care instructions and a phone number (888) 405-6638 for any questions. Our warranty covers early cracks from workmanship. We leave the site clean and ready to use.
Our crew lays fresh concrete driveways across Creve Coeur and the surrounding towns—Des Peres, Maryland Heights, Brentwood, Overland, and Glendale. We start with a solid, well-compacted base, grade it for proper drainage, and set sturdy forms and rebar before pouring. The slab runs at least four inches thick for passenger cars and six inches where trucks park. We finish each job with a smooth trowel, add a slight slope, and cure it correctly to keep cracks out. Pricing is clear and upfront, no hidden fees, so you know exactly what you’re paying. Call (888) 405-6638 for a free estimate and reliable service you can count on.
After seeing how hard it can be to find dependable new concrete driveway, the owner — a retired US Navy veteran — built this website and network to connect homeowners like you with local professionals who show up, do the prep, and leave the place looking the way it should.
We arrive on schedule and bring all the tools we need. The crew checks the existing soil and clears debris before anything else. We set up wooden forms to hold the concrete shape. Proper base preparation prevents future settling. The team makes sure the slope drains water away from the house.
We tell you exactly what we’re doing, no fancy jargon. First we grade the ground and compact it to a solid base. Then we install rebar for strength and lay forms with the right pitch. The concrete mix is poured to the specified thickness. We finish with a smooth trowel and a broom for slip resistance.
Your driveway is a priority, not an afterthought. We measure the area and design the slope for proper drainage. The base is built with crushed stone for stability. Rebar is placed to stop cracking under weight. After curing, you get a solid surface that lasts.
Quality starts with a clean, compacted subgrade. We lay a geotextile fabric to separate soil from the base. Forms are checked for level and alignment before pour. Concrete is poured to the right depth and vibrated to remove air pockets. We cure it correctly to avoid shrinkage cracks.
We serve the Creve Coeur area and surrounding neighborhoods. Our trucks carry enough concrete for large jobs without delays. The crew knows local weather patterns for optimal curing times. We handle permits and inspections if needed. You get a finished driveway ready to use in days.
Call us at (888) 405-6638 to set up a free site visit. We'll walk the property, explain the process, and give a clear quote. No hidden fees, just straightforward pricing. You can schedule the pour at a convenient time. After the job, we clean up and leave the site ready for use.
By submitting your information through this form or by providing it during a phone call, you consent to having your personal details (such as name, email, phone number, and any other information you provide) transmitted directly to our trusted service provider for the purpose of responding to your inquiry or request.
We do not store, process, or retain your information on this website. Your details are sent securely and exclusively to the service provider and are not shared with any other third parties.
We are committed to protecting your privacy and handling your information responsibly. If you have any questions about this practice, please contact us.